The Ergosphere
Monday, November 29, 2010
 

Batacitor brings on end of the world! Film at 11.

This is huge.  I have trouble emphasizing HOW huge this is.  "Earthshaking" is an understatement.  It is "the end of petroleum's stranglehold on transportation" huge.

Green Car Congress reports on a joint announcement by Nanotek Instruments and Angstron Materials of a supercapacitor which has energy storage over 80 Wh/kg.  This is in the performance region of nickel metal hydride materials and getting close to lithium-ion, in a material which can handle 1000 A/kg.  The claimed energy capacity of 85.6 Wh/kg, assuming a working voltage range of 0 to 4 volts, gives a capacitance of about 38 farads per gram; charging and discharging at 1 A/g, this could go from empty (45% voltage) to full in 80 seconds... or the reverse.

Charging or discharging, this is pretty impressive.  1 A/g @ 2 V is 2 kW/kg, or 200 kW from a 100 kg capacitor.  That's 268 horsepower at the low end of the discharge curve (half voltage to full).  You could get some pretty serious punch out of this, or cram lots of regenerative braking power into it.  The Buick LaCrosse BAS system could do with a 10 kg capacitor instead of a battery 3 times as heavy.

But that's just the beginning.  There's another energy-storage mode in this material which can boost the yield in two ways!  But to explain this, I need to go back to basic electronics and capacitors.

The classic capacitor stores energy by storing electrons on one plate, which attracts positive charges to (or repels electrons from) the other and holds energy in the electric field between them.  Dielectrics can increase the charge stored and also introduce non-linearities such as hysteresis losses.  But by and large, the charge and energy follow relatively simple equations relating the capacitance C, charge Q, voltage V and energy E:
Q = C·V
E = ½C·V²

But all this assumes that capacitance is a constant.  If a charge is put on a capacitor and the capacitance is varied, voltage and energy vary with the capacitance:
V = Q
C
E = ½
C

What does this mean, given that the capacitance of this material rises with increasing temperature?  It means that the energy stored can be increased by cooling it, releasing both electrical and heat energy at the same time.

The specific heat of the material is not given, and I won't estimate it.  But if the capacitor is cooled from 80°C to "room temperature" while holding the voltage constant at maximum followed by a normal discharge, the energy available on a cycle rises from 136 Wh/kg to a whopping 186 Wh/kg.  This is in addition to the heat released, which is (at least initially) hot enough to provide fast windshield defrosting and a nice, warm cabin within seconds of activation.  Instead of being disadvantaged in the cold, the batacitor-electric car could wind up having better creature comforts than anything currently on the market.

If 1/4 to 1/2 of the storage system is active material, such a temperature-managed capacitor would eke out 45-90 Wh/kg.  A Chevy Volt-sized pack storing 10 kWh would be about 111-222 kg (245-490 lb).  This brackets the weight of the actual Volt battery (375 lb).  It would also be able to take a recharge in less than 2 minutes.

With "range anxiety" eliminated and cycle lifetime and charging time removed from the list of people's concerns, the only barrier keeping PHEVs from a full takeover of the auto industry is the ability to manufacture the capacitors themselves.  Graphite is a very cheap material, and hardly scarce worldwide.

In a world of even 45 Wh/kg graphene capacitors it makes no sense for any vehicle not to be partially electric.  Whole sectors could switch from liquid fuels to grid power.  It's the death knell for petroleum.  It's the end of the world as we know it, and I feel fine!

 
Talk largely about energy and work, but also politics and other random thoughts


Mail Engineer-Poet

(If you're mailing a question, is it already in the FAQ?)

Important links

The FAQ
Glossary
The Reference Library

Blogchild of

Armed and Dangerous

Blogparent of

R-Squared




The best prospect for our energy future:
Flibe Energy

ARCHIVES
January 1990 / February 2004 / March 2004 / June 2004 / July 2004 / August 2004 / September 2004 / October 2004 / November 2004 / December 2004 / January 2005 / February 2005 / March 2005 / April 2005 / May 2005 / June 2005 / July 2005 / August 2005 / September 2005 / October 2005 / November 2005 / December 2005 / January 2006 / February 2006 / March 2006 / April 2006 / May 2006 / June 2006 / July 2006 / August 2006 / September 2006 / October 2006 / November 2006 / December 2006 / January 2007 / February 2007 / March 2007 / April 2007 / December 2007 / January 2008 / May 2008 / June 2008 / August 2008 / October 2008 / November 2008 / December 2008 / February 2009 / March 2009 / April 2009 / May 2009 / June 2009 / July 2009 / August 2009 / September 2009 / October 2009 / November 2009 / December 2009 / January 2010 / April 2010 / May 2010 / June 2010 / July 2010 / August 2010 / September 2010 / October 2010 / November 2010 / December 2010 / January 2011 / February 2011 / March 2011 / April 2011 / May 2011 / July 2011 / August 2011 / September 2011 / October 2011 / April 2013 / November 2013 / December 2013 / January 2014 / February 2014 / March 2014 / April 2014 / July 2014 / August 2014 / September 2014 / October 2014 / November 2014 / February 2015 / April 2015 / October 2015 / March 2016 / April 2016 / May 2016 / June 2016 / July 2016 / November 2016 / December 2016 / February 2017 / May 2017 / June 2017 / September 2017 / October 2017 / November 2017 / March 2018 / May 2018 / June 2018 / October 2018 / December 2018 / January 2019 / March 2019 / June 2019 / October 2019 / November 2019 / March 2020 / June 2020 / December 2020 / March 2021 / April 2021 / May 2021 / July 2021 / January 2022 / February 2022 /


Powered by Blogger

RSS feed

Visits since 2006/05/11: